Project Description

Crawford DL6030C combidock

Zvaniet, lai uzzinātu cenu

Downloads

Product leaflet Product datasheet BIM objects Specification texts

Description

The electro-hydraulic Crawford DL6030C combidock eliminates the need for different ramp heights and thereby reduces building costs. It is advisable to equip every frequent loading area with at least one Crawford DL6030C combidock so that vehicles of all sizes can he efficiently handled.

The telescopic lip is supplied in high-stability aluminium alloy which extremely flat, resulting in smoother passages between leveller and truck bed – giving ergonomic as well as economical advantages due to reduced chock  oads for people and less wear and tear on the handling equipment.

Vehicles sink and rise during loading and unloading. A special safety control system ensures that the leveller automatically follows the vertical movements of the vehicle bed. Should the bed move horizontally, the same automatic system keeps the lip against the bed, facilitating safe and smooth passages.


Lorry or van – just turn the switch

Simply set the selection switch and the relevant automation program is started. When set on “Small Lorries”, leveller lip side tongues are retracted and the width is reduced by 1000 mm. At the same time, the down-force of the leveller platform is reduced by a hydraulic unit. Just use the selector switch for return to standard lorry performance.


Crawford 950 series – the intelligent, all in one, docking control system
The innovative and unique 950 series docking control system gives you direct control of the dock leveller, dock shelter and door all in one control unit. With only a few self explaining buttons it is easy to operate, to meet the demands of modern logistics. Separate steering units or complex wiring are no longer needed.


 

Technical specifications

Technical Data

Nominal length

3000, 3500, 4000 mm
Nominal width 2000 mm
Load capacity lorries 60 kN (6 tonnes)
vans 20 kN (2 tonnes)
Vertical working range
Rise above dock
Fall below dock

up to 590 mm
down to 650 mm

Platform tear-plate thickness 8/10 mm
Max. point load leveller platform 6,5 N /mm2 (8 mm tear plate)
Lip material & length aluminium, 500 mm
Control unit protection class IP 54
Nominal voltage 400V 3-phase
Nominal motor power 1,5 kW
Control unit standard truck / city
van mode Impulse auto
button. Optional with
door operation
European standard EN 1398 Dock levellers